Material Safety Data Sheet
Soak off nail polish gel MSDS# 1217012010
SECTION 1. IDENTIFICATION
Product name: Adddictive UV LED Gel nail polish
SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS
components cas %
Rathane acrylate coplymer 152187-46-7 65-75
Sio2 112 945-52-5 1-5
Ethylene glycol methacrylate 868-77-9 10-20
Photoinitiator 947-19-3 1-5
(HYDROXYCYCLOHEXYL PHENYL KETONE)
Photoinitiator 75980-60-8 1-5
(diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide)
Pigment see below 1-2
IT CONTAINTS THE FOLLOWING INGREDIENTS (each color mixed by 1 or several below ingredients, and % for
each is also different):
Pigment: INCI CAS C.I.
Titanuium White PW6 13463-67-7 77891
Quinacridone Red PR 122 980-26-7 73915
Hansa Orange PO1 6371-96-6 11725
Hansa Yellow G PY1 2512-29-0 11680
Phthalocyanine Green BS PG 7 1328-53-6 74260
Phthalocyanine Blue PB15:2 12239-87-1 74160 A FORM
Quinacridone Violet PV 19 1047-16-1 73900
Lamp Black PBK7 1333-86-4 77266
SECTION 3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Physical state: Liquid HEALTH: 1*
Color:COLOR FLAMMABILITY: 2
Odor: light PHYSICAL HAZARD: 1
Personal Protection: See Section 8
WARNING: HARMFUL IF SWALLOWED, ABSORBED THROUGH SKIN OR
INHALED.
DO NOT SPRAY. DO NOT HEAT.
MAY CAUSE ALLERGIC SKIN REACTION.
CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION
Relevant routes of exposure: Skin, Inhalation, Eyes
Potential Health Effects
Skin contact: Contact skin will cause irritation.
Eye contact: Contact with eyes will cause irritation.
SECTION 4. FIRST AID MEASURES
Inhalation: Remove to fresh air. If symptoms develop and persist, get medical
attention.
Skin contact: Immediately flush skin with plenty of water (using soap, if
available). Remove contaminated clothing
and shoes. Wash clothing before reuse. Get immediate medical attention if
symptoms occur.
Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes.
Get immediate medical attention.
Ingestion: Do not induce vomiting. Keep individual calm. Get medical attention
immediately.
SECTION 5. FIRE-FIGHTING MEASURES
Flash point: 87°C
Autoignition temperature: Not available
Flammable/Explosive limits-lower %: Not available
Flammable/Explosive limits-upper %: Not available
Extinguishing media: Foam, dry chemical or carbon dioxide.
Special fire fighting procedures: Wear self-contained breathing apparatus and
full protective clothing, such as turn-out gear.
Unusual fire or explosion hazards: Uncontrolled polymerization may occur at
high temperatures resulting in explosions or rupture of storage containers.
Hazardous combustion products: Oxides of carbon. Oxides of nitrogen.
Irritating organic vapors. Toxic fumes.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Environmental precautions: Remove sources of ignition. Prevent product from
entering drains or open waters.
Clean-up methods: Refer to Section 8 “Exposure Controls / Personal
Protection” prior to clean up. Soak up with inert absorbent. Store in a partly
filled, closed container until disposal.
SECTION 7. HANDLING AND STORAGE
Handling: Prevent contact with eyes, skin and clothing. Do not breathe vapor
and mist. Wash thoroughly after handling. DO NOT heat or spray. Use only with
adequate ventilation. Refer to Section 8. Use only in area provided with
appropriate exhaust ventilation.
Storage: For safe storage, store at or below 26°C (80°F). Keep in a cool, well
ventilated area away from heat, sparks and open flame. Keep container tightly
closed until ready for use.
Incompatible products: Refer to Section 10.
SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls: Local exhaust ventilation is recommended when general
ventilation is not sufficient to control airborne contamination below
occupational exposure limits.
Respiratory protection: Use COSHA approved respirator if there is potential to
exceed exposure limit(s). If this material is handled at elevated temperatures or
under mist forming conditions, without engineering controls, a COSHA
approved respirator must be used.
Skin protection: Use impermeable gloves and protective clothing as necessary
to prevent skin contact. Neoprene gloves.
Eye/face protection: Safety goggles or safety glasses with side shields. In a
splash hazard environment, chemical goggles should be used in combination
with a full face shield.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state: Liquid Color: transparent
Odor: light Vapor pressure: Not available
pH: Not applicable Boiling point/range: Greater
than 93°C (200°F)
Melting point/range: Not available Specific gravity: 1.10
Vapor density: Not available Evaporation rate: Not available
Solubility in water: Slight Partition coefficient
(n-octanol/water): Not available
VOC content: Total volatiles 0.80 %
SECTION 10. STABILITY AND REACTIVITY
Stability: Stable under normal conditions of storage and use.
Hazardous polymerization: May occur.
Hazardous decomposition products: Oxides of carbon. Oxides of nitrogen.
Dimethylamine. Irritating organic vapors.
Incompatability: Strong acids. Strong oxidizing agents. Bases.
Conditions to avoid: Heat, flames, sparks and other sources of ignition. Do not
heat above 26°C(80°C).
SECTION 11. TOXICOLOGICAL INFORMATION
Carcinogen Status
Hazardous components
NTP Carcinogen NO
IARC Carcinogen NO
COSHA NO
Carcinogen NO
Polyurethane NO
acrylate oligomer NO
Ethylene glycol NO
Methacrylate NO
special acrylate NO
oligomer NO
anti-setting agent NO
Photoinitiator NO
Pigment NO
Literature Referenced Target Organ & Other Health Effects
Hazardous components
Health Effects/Target Organs
polyurethane acrylate oligomer No Records
special acrylate oligomer No Records
Ethylene glycol methacrylate No Records
anti-setting agent No Records
Photoinitiator No Records
Pigment No Records
SECTION 12. ECOLOGICAL INFORMATION
Ecological information: Not available
- DISPOSAL CONSIDERATIONS
Information provided is for unused product only.
Recommended method of disposal: Dispose of according to P.R.C, province
and local governmental regulations.
ECE hazardous waste number: Not a RCRA hazardous waste.
SECTION 14. TRANSPORT INFORMATION
The shipping classifications in this section are for non-bulk packaging only
(unless otherwise specified). Shipping classification may be different for bulk
packaging.
P.R.C Department of Transportation Ground :
Proper shipping name: Unrestricted
Hazard class or division: None
Identification number: None
Packing group: None
International Air Transportation (ICAO/IATA):
Proper shipping name: Unrestricted
Hazard class or division: None
Identification number: None
Packing group: None
WaterTransportation (IMO/IMDG):
Proper shipping name: Unrestricted
Hazard class or division: None
Identification number: None
Packing group: None
Marine pollutant: None
SECTION 15. REGULATORY INFORMATION
P.R.CRegulatory Information
All components are listed or are exempt from listing on the Toxic Substances
Control Act Inventory.
SECTION 16. OTHER INFORMATION
DISCLAIMER: The data contained herein are furnished for information only and
are believed to be reliable. However, ADDCITIVE NAILS does not assume
responsibility for any results obtained by persons over whose methods
ADDICTIVE NAILS has no control. It is the user’s responsibility to determine the
suitability of ADDICTIVE’s products or any production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be
involved in the handling and use of any of ADDICTIVE NAIL‘s products. In light
of the foregoing, ADDICTIVE NAIL Corporation specifically disclaims all warranties, express or implied, including warranties of merchantability and
fitness for a particular purpose, arising from sale or use of ADDICTIVE NAIL’S
products. ADDICTIVE NAIL’S further disclaims any liability for consequential or incidental damages of any kind, including lost
profits.